Author Topic: Mapping  (Read 564 times)

0 Members and 1 Guest are viewing this topic.

Offline Jackeroo

  • Newbie
  • *
  • Topic Author
  • Posts: 9
  • Bike: Street triple r 2009
  • City / Town: Bristol
  • Country: gb
Re: Mapping
Reply #10 on: June 01, 2020, 12:29:40 PM
All great advice thank you everyone.
So the issue was there with the original throttle tube hence I tried the mod and it is still the same I am pretty sure last owner just fitted the sc project end cans and did nothing else.
Is there 2 maps on the ECU to start with regarding the arrow cans? If not where can I find pitchers

Offline deej

  • Street Triple Member
  • **
  • Posts: 66
  • Bike: STR 2008
  • City / Town: Norfolk
  • Country: gb
Re: Mapping
Reply #11 on: June 01, 2020, 12:56:42 PM
No, only one map at a time.

The maps I listed are for the vin# as stated:  first one is standard tune, the second is with aftermarket silencers.

To be fair, the bike should have been fine with an end can change and the original map. There is no need to remap for SC Project end cans, although there's no harm in doing so.

Good luck
Last Edit: June 01, 2020, 12:59:16 PM by deej

Offline tim.8061

  • Street Triple God
  • *****
  • Posts: 1975
  • Bike: Street Triple 09
  • City / Town: Gloucester
  • Country: england
Re: Mapping
Reply #12 on: June 01, 2020, 07:33:07 PM
If you check your VIN and go to the Tuneecu website it lists available maps with a description of what they are for.

Offline Jackeroo

  • Newbie
  • *
  • Topic Author
  • Posts: 9
  • Bike: Street triple r 2009
  • City / Town: Bristol
  • Country: gb
Re: Mapping
Reply #13 on: June 14, 2020, 05:54:55 PM
So I have got my lead now and connected via android phone how do I download map to then re flash ECU? I get the message I donr have an app to support this.
Also cany get anything to work on my laptop.
Thank again lads and ladettes👍👍

Offline Jackeroo

  • Newbie
  • *
  • Topic Author
  • Posts: 9
  • Bike: Street triple r 2009
  • City / Town: Bristol
  • Country: gb
Re: Mapping
Reply #14 on: June 16, 2020, 07:45:30 PM
Hi all I really do need a bit of help please.