Author Topic: Best price for suspension rollers including shock lower rollers please  (Read 4944 times)

0 Members and 1 Guest are viewing this topic.

Offline street tango

  • Street Triple Master
  • ****
  • Posts: 515
  • The world is orange
  • City / Town: Bristol
You must use full compliment bearings. Not caged as they do not have the load capacity. When you fit bearings you will notice the ends are different. One has sides that are flat with writing on. The other is round. You fit pressing against the flat edge. If you press in with the round edge you deform the bearing.

Offline JamesDeath

  • Street Triple Member
  • **
  • Topic Author
  • Posts: 53
  • Bike: Street R 2009
  • Country: gb
You know when you’ve been Street Tangoed,
Thanks for that, got the bearings off flea bay.
German for the bottom of shock and japan for the 3 others.
Thanks for fitting info so just a push out and push in hobby?

Offline street tango

  • Street Triple Master
  • ****
  • Posts: 515
  • The world is orange
  • City / Town: Bristol
Sounds like you are on top of it all.